New Equipment and Replacement Parts and Filter Press

NFM Manufactured Products


NFM can supply filter presses in many sizes and configurations.

  • 450 mm press
  • 630 mm press
  • 800 mm press
  • 1000 mm press
  • 1200 mm press
  • 1500 mm press
  • 1.5 x 2 mm press
  • Other sizes as per customer requirements

NFM Filter Presses come in a variety of configurations from the very simple manual control to the sophisticated fully automatic that requires only a minimum of operator attention.

  • Simple Manual Closing
  • Semi-Automatic
  • Automatic
  • Fully Automatic

Request a Quote

Product Information - select all options that apply and fill out form below

Filter Press


Recessed Plate

CGR Plate

Custom Products
The NFM filter press consists of the following:
  1. The Frame
  2. A Fixed Head Plate and a Slide Head Plate
  3. The Filter Plates
  4. A closing mechanism (manual to automatic hydraulic)
  5. Feed piping and pump/motor
  6. Exit piping for capturing liquid
  7. Discharge chute or conveyor belt to remove cake solids
NFM has 3 typical plate configurations:
  1. Plate and Frame
  2. Recessed Plate as show
  3. CGR Plate
The CGR Plate is primarily used with volatile chemicals where no leakage is tolerable. With the filter cloth internal of the exterior seal no leakage can occur on the CGR plate and filter press.
NFM manufactures a wide range of wet filtration products from many special synthetic fabrics with special yarns, weave and finishes. Show are the filter cloths for an Lasta Filter Press, a vacuum drum filter belt, a filter cloth for a filter press, a bag for a pressure filter, a disc sector bag and another filter press filter cloth. Many filter cloth items require specialty fittings such as grommets, eyelets, special reinforcements, special threads, Velcro, zippers and elastomers are manufactured by the NFM for customer’s specific requirements.
NFM manufactures a wide range of filter cloths for Filter Presses of many manufacturers using special synthetic fabrics woven and non woven with special finishes to meet the needs of production and chemical resistance. Custom manufacturing is noted in the special feed eye, tabs and reinforcements with holes punched to fit the filter press plate.
NFM manufactures a wide range of filter press cloths to meet the needs of the many manufacturers of filter presses. This is a special filter cloth panel for the Lasta Filter Press.
NFM manufactures filter cloths for recessed plates, CGR plates and plate and frame filter presses. Reinforced center barrels, heat cut eyelets and special grommets are but a few of the detailed manufactured products that NFM manufactures.
NFM has many highly trained employees that are skilled in their profession with quality their most important product.

Filter Cloth

Lasta Cloth

Press Cloth

Skilled Employees

Contact Information

First Name: *
Last Name: *
Phone #:
Email Address: *
Additional Information:


Enter the code shown to the left: